Some 'A' and 'B' plates have been spotted on overseas guitars. Usually, they sport a first letter, then have another letter prefixing the number. Ex: A A1234 Range - Bxxxxx There are versions of a B plate that are cast metal, that showed up in the later years for Kramer.

Kramer Guitars is an American manufacturer of electric guitars and basses. Kramer produced aluminum-necked electric guitars and basses in the 1970s and wooden-necked guitars catering to hard rock and heavy metal musicians in the 1980s; Kramer is currently a division of Gibson Guitar Corporation.

• Kramer Guitars Info. If the serial number of your Kramer starts with the following serial numbers, it is NOT a USA Made or 'American' series Kramer: 1) Two letters followed by a serial number (e.g. AA1234, AC1234. It is a 1984-1986 USA Made/American Series Kramer Guitar.
• Kramer American Models Serial Number Registry - Archive. The Kramer Registry is now closed for new submissions. We thank everyone for contributing their Kramers through the years. The original intent of the registry was to attempt to get an idea of the history of Kramer since serial records for the old factory are unavailable.
• Kramer American Models Serial Number Registry - Archive. The Kramer Registry is now closed for new submissions. We thank everyone for contributing their Kramers through the years. The original intent of the registry was to attempt to get an idea of the history of.
• Kramer Guitars is an American manufacturer of electric guitars and basses. Kramer produced aluminum-necked electric guitars and basses in the 1970s and wooden-necked guitars catering to hard rock and heavy metal musicians in the 1980s; Kramer is currently a division of Gibson Guitar Corporation.

• 7Kramer Models

Formation[edit]

There is some dispute over the company's early history, but it begins with Travis Bean, a California luthier who was building guitars with aluminum necks. Bean and Gary Kramer started the Travis Bean guitar company in 1974, in Sun Valley, and while their guitars did well, Bean lost interest and left most of the business aspects to Kramer; the two parted ways.^[1]

Kramer then founded the company that still bears his name, improving on the Bean design—Bean's necks were heavy and the material felt cold to the touch. Kramer's improvement consisted of two wooden inserts in the back of the neck. By 1975 he had hooked up with a friend from New York, Dennis Berardi, and the two founded BK International, which engaged luthier Phil Petillo to make prototypes for them. Other involved parties were Henry Vaccaro, a real estate person who invested money in the venture, and Peter LaPlaca, who had experience with Norlin, the company that owned Gibson Guitar Corporation from 1969 to 1986. The rest of the account is murky: Kramer says he was supposed to increase production but was too inexperienced in that area, and he wanted to move back to the West Coast. He was to sell back his interests and receive royalties, and then represent the company out west, but none of this seems to have happened.^[1]

Kramer Bass For Sale

1970s: aluminum necks[edit]

Introduced in 1976, early models featured the trademark 'tuning fork head' aluminum-reinforced necks with a fretboard made of Ebonol—material similar to one used in bowling ball production. Other features of the necks included aluminum dots, and a zero fret. Gary Kramer's inserts, set in epoxy, were usually walnut or maple. The bodies were usually made of high grade Walnut or Maple, with the earliest instruments made of exotic tonewoods including Koa, Afromosia, Swietenia, Shedua, and Bubinga. The hardware was also from a known quality brand: Schallertuning keys and bridges; Schaller and DiMarziopickups; custom-made strap pins; aluminum cavity covers. Kramer's 'alumi-neck' line lasted roughly until 1982.

Generally, the ratio of basses to guitars produced was about 4:1,^{[citation needed]} primarily because bass players were more willing to experiment. By 1981, Kramer had the tools, and the experience, to take guitar mass production to a new level. Switching to wooden-necked instruments both held the promise of keeping production costs low as well as being able to appeal to traditionally-minded guitar players.^[2]

Wooden neck period[edit]

Kramer first released wooden-necked guitars in late 1981, following Charvel's lead on producing instruments that essentially copied the stratocasterheadstock shape from Fender, in violation of Fender's US trademark and design patent. After only a thousand or so instruments were built, in May 1981, Kramer received a cease and desist order from Fender to halt the production of strathead guitars.^{[citation needed]} Instead, Kramer opted for a 'beak' headstock reminiscent of 1960s Kent guitar headstocks. The earliest beak guitars were in fact stratheads with a lopped off headstock; these can be identified by prominent sanding marks on the curve of the headstock.^{[citation needed]} Later, and most common beak guitars, were manufactured with a beak headstock from the factory.^{[citation needed]}

Wooden-necked instruments represented Kramer's first foray into offshoring the production of guitar components to Eastern Asia. Tuning keys and vintage fulcrum tremolos were made by Gotoh in Japan, while the necks were made by Japan's ESP Guitars and shipped to New Jersey for fretting and finishing.^{[citation needed]}

Kramer executives saw that the guitar techniques of the early 1980s demanded a high-performance tremolo system. Kramer partnered with a German inventor named Helmut Rockinger, and installed his bulky tremolos, precursors to Floyd Rose systems, on its instruments.^{[citation needed]}

Early to mid-1980s[edit]

A chance encounter between Dennis Berardi and Eddie Van Halen's managers on an airplane flight set the foundation for Kramer's meteoric rise in the 1980s. Eddie was interested in a tremolo that stayed in tune, which the Rockinger system offered. A meeting between Eddie Van Halen and Kramer execs took place, and Eddie was sold. At the meeting, he reportedly quipped that he would help make Kramer the '#1 guitar company in the world.'^{[citation needed]}

By 1983 the Rockinger tremolo (sometimes dubbed 'The Eddie Van Halen tremolo') had been widely replaced by the Floyd Rose system. In addition, Kramer once again offered Schaller tuners on their guitars, tapping Schaller to produce Floyd Rose tremolos as well. Kramer was the only guitar company offering Original Floyd Rose tremolos stock on their production guitars, a competitive advantage of Kramer over other guitar manufacturers of the period.

In late 1983 Kramer switched from the 'beak' headstock design to the Gibson Explorer-like 'banana' headstock design. This distinctive look also helped rank Kramer highly with guitar enthusiasts. One notable Kramer guitar was the Baretta model, which was a single-humbucker instrument similar to guitars Eddie Van Halen used on stage. The Kramer Baretta was the flagship of the Kramer line and helped popularize the single-pickup 1980s superstrat guitar design.

By late 1985 Kramer began installing Seymour Duncan pickups in its guitars, in preference to the more vintage-sounding Schaller pickups. When the sales figures came in, Kramer was the best-selling guitar brand of 1985.

In 1986 Kramer switched to the radically drooped 'pointy headstock' design, no doubt^{[citation needed]} influenced by the pointy designs of Jackson/Charvel and other manufacturers such as Hamer and Washburn. Schaller tuners, Floyd Rose tremolos, Seymour Duncan pickups and exciting graphics by talented factory artists such as Dennis Kline helped propel Kramer to become the best-selling guitar brand of 1986.

Late 1980s[edit]

Kramer continued its success into the late 1980s, promoting hard rock and glam metal artists from Mötley Crüe's Mick Mars to Whitesnake's Vivian Campbell as major endorsees.

By 1987, Kramer was using ESP Guitars exclusively for manufacturing its necks and bodies. The 'American Series' of instruments were ESP parts, assembled in Neptune, New Jersey. The Aerostar series were made completely in Korea, while the Focus series was made and assembled by ESP Guitars. Some early Focus guitars were also made in Japan by the Matsumoku company.

During 1987, Kramer also commissioned guitarist Rich Excellente, designer of the '1957 Chevy Tail-fin' guitar, to create a series of guitars based on the patented features Excellente developed on his 'Chevy Tail-Fin' guitar. Kramer, under license from Excellente, manufactured a line of guitars which were marketed as 'The Kramer American Showster Series'. These guitars were sleeker versions of the more traditional shapes of the day, and utilized Excellente's patented 'tear-drop' body taper and 'metal loading' insert feature to increase tone and sustain.(U.S.Pat.4,635,522). Fewer than 1,000 of these guitars were produced between 1988–1990, and the line was discontinued during 1990 due to manufacturing problems which began to plague Kramer during that time.

In addition, Kramer embraced the excess of the late 1980s—producing slick and fluorescent guitars, losing its thought leadership in the guitar manufacturing arena, and damaging the image of the brand. Similarly, the image of the Kramer brand was being tarnished by an influx of Aerostar guitars, lower in quality and made with cheap parts.

By 1989, Dennis Berardi had started Berardi/Thomas Entertainment, Inc—an artist management company. Seeing promise in a young band out of the Soviet Union, Gorky Park, BTE started managing the group. To help promote the band, the infamous 'Gorky Park' guitars were made, reportedly to be given to guitar dealers as promotional pieces. BTE banked on the Gorky Park guitars to help promote the group. When the Russian band achieved only a mild measure of success, this was a significant, and final blow to the first incarnation of the Kramer company.

1990–present[edit]

The original Kramer company effectively came to an end in January 1991, mostly due to financial problems. The company had been spending huge amounts on advertising and endorsements, and then lost a lawsuit with Floyd D. Rose over royalties. A notorious firesale of surplus necks, bodies and hardware was held out of New Jersey. In the early '90s, Artist Relations manager Billy 'Falcon' Connolly left New Jersey and moved to Princeton, West Virginia and started a small guitar company called Falcon Custom Guitars. Billy made fine electric and beautiful hand made acoustic guitars that are cherished by his Kramer fans. Falcon Custom Guitars came to an untimely close at the end of summer of 1999 when Billy died.

By 1995, Henry Vaccaro Sr. owned the Kramer brand; in addition, he was the only one of the original partners interested in continuing in the guitar business. He tried one last time to produce Kramer guitars from surplus parts, in the Neptune plant, but only a few hundred were made. Henry Vaccaro Sr. started making aluminum-necked guitars under the name Vaccaro Guitars, but that, too, was short-lived.

In 2005 the original founder and namesake of Kramer Guitars, Gary Kramer, started his own guitar company: Gary Kramer Guitars.^[3]In 2007, the original service manager of Kramer Guitars, legendary luthier Paul Unkert started his own guitar company, featuring designs reminiscent of aluminum-era Kramers: Unk Guitars.^[4]

The Kramer brand was sold out of bankruptcy to Gibson Guitar Corporation. Gibson's Epiphone division has produced guitars and basses under the Kramer brand since the late 1990s, mostly factory-direct through the now-defunct MusicYo.com website. Encouraged by the resurgence of interest in the Kramer brand, Epiphone has been reissuing classic Kramer models, including the '1984 Model;' (a homage to Eddie Van Halen's famous '5150' guitar used from 1984-1991) the 'Jersey Star;' (a homage to the Richie Sambora signature 1980s Kramer) and most recently, the '1985 Baretta Reissue (A standard slant-pickup Baretta)'. These high-end instruments are assembled in the USA from American components. In January 2009, Gibson shut down the MusicYo.com website, instead promising that Kramers would be available through dealers and in music stores by the end of 2009. But supply was not consistent and promised new models were either seriously delayed or never produced.

More recently however under guidance from a dedicated Kramer team at Gibson, new models have made it to stores, and now includes the budget priced Baretta Special (a model touted on the MusicYo pages but never released until now) plus designs never seen before including the Pariah & Assault (including FR tremolo models) ranges brought out to bring the Kramer name to a new generation of rock musicians, while homages to vintage models like the Stagemaster in the form of the SM-1 and Classic Pacer Imperial now simply called the Pacer Vintage are also still produced.^{[citation needed]}

In 2007, a Kramer Striker controller was created for Guitar Hero III for the PS2, under a licensing agreement with Gibson Guitar Corporation. A Kramer Focus was also available as an in-game guitar, as was one of the earlier aluminum neck model Kramers. The Kramer Fatboy has been featured in Guitar Hero III: Legends of Rock and Guitar Hero Aerosmith.

Original Kramer guitars are now highly collectable, after being considered undesirable in the early-mid-1990s. They regularly fetch high prices on eBay and other auction sites. Kramer collectors held a Kramer Expo every year in Nashville, Tennessee, near the Gibson plant, from 2003-2008. More recently, expos have been held annually in locations around Europe including the Netherlands, Newcastle upon Tyne in 2006 & 2007, and Liverpool, UK in 2010 & 2012, to showcase and celebrate Kramer guitars.^[5]

Kramer Models[edit]

Kramer Aluminum Neck Guitars[edit]

• Kramer 250
• Kramer 335 (Hollowbody)
• Kramer 350
• Kramer 450
• Kramer 650
• Kramer DMZ series
• Kramer XK series
• Kramer Duke series
• Kramer Gene Simmons axe guitar and bass
• Kramer Challenger

Kramer USA and American[edit]

(Please Note: Kramers listed below were not built in USA post 1986. Only Assembled.)

• Kramer Classic
• Kramer Condor
• Kramer Liberty
• Kramer Pioneer Bass
• Kramer Proaxe
• Kramer Triax
• Kramer Enterprize
• Kramer Invader
• Kramer Vanguard
• Kramer Voyager
• Kramer Sustainer

Kramer USA and American – signature models[edit]

• Kramer Floyd Rose Model
• Kramer Elliot Easton Model
• Kramer NightSwan (Vivian Campbell Model)
• Kramer Sambora (aka 'Jersey Star') (Richie Sambora Model)
• Kramer Ripley (Steve Ripley Model)
• Kramer Gorky Park model
• Kramer Paul Dean model

Kramer Overseas – made in Czech Republic[edit]

• Kramer Pacer (S Serial Number, No 'American' on headstock)
  • NOTE*** These guitars may have been produced after the 1990 closure of Neptune, NJ Kramer.

Kramer Overseas – made in Japan[edit]

• Kramer Forum Series (Bass)
• Kramer JK, LK, MK Series (Made for Japanese market)

Kramer Overseas – made in Korea[edit]

• • NEPTUNE ERA***
• Kramer Aerostar (ZX)
• Kramer Ferrington
• Kramer Gorky Park Model
• Kramer KS-400, KS400
• Kramer Metallist
• Kramer Regent
• Kramer Savant
• Kramer Showster
• Kramer Starfighter
• Kramer Striker Series
• Kramer Hundred Series
• Kramer XL series

Kramer by Gibson – USA-made Models[edit]

Kramer Bass Guitar Serial Numbers

• Kramer 1985 Baretta Reissue
• Kramer '1984' & Guitart Series

Kramer by Gibson '98–'08 – Korean Made Models (1998–2005)[edit]

• • also known as 'The Yo Era Guitars'**
• Kramer Pacer (2xx)
• Kramer Striker (fr/s 4xx)
• Kramer Baretta Neck-Thru
• Kramer Baretta bolt on
• Kramer Vanguard (fr/s 4xx)
• Kramer Assault (2xx)
• Kramer Imperial

References[edit]

1. ^ ^abWright, Michael (December 2014). 'The Kramer Stagemaster'. Vintage Guitar.
2. ^'Kramer Aluminum Neck Guitars'. Vintage Kramer. Retrieved 23 September 2014.
3. ^garykramerguitar.com
4. ^unkguitars.com
5. ^'Kramer Expo DOT COM - Official Website'. Retrieved 23 September 2014.

External links[edit]

• Kramer Guitars on Twitter
• Kramer Guitars on Facebook
• NAMM Oral History Interview with Gary Kramer September 10, 2009
• Kramer Guitars History (Interview with Gary Kramer) PT1 & PT2

Kramer Bass Guitar Serial Numbers Lookup